#Iei keypad 212i manual#
#Iei keypad 212i code#

#Iei keypad 212i manual#

Simple programming shall allow the output to toggle (by code) or time from 1 to 90 seconds. Keypad Door-Gard 212i Wiring Diagrams & Specifi Cations (4 pages) Keypad Door-Gard COMMAND AND CONTROL SERIES Programming Manual (4 pages) Summary of Contents for Door-Gard 2000e. The lock release relay shall be rated at 8 amps and shall be tough enough to handle any locking device. This output may be wired to a siren, buzzer, guard station, camera or any other device.

The system shall alert the resident to any 'propped' door by energizing a 1 amp Form 'C' relay. The system's propped door relay shall be programmable for a 1 to 15 minute time window in which the door may be held open after a valid entry. This output can be programmed to energize for up to 15 minutes or latch. Codes may be from 1-6 digits in length and digits may be repeated.Īssisted by the door position sensor input, this 1 amp Form 'C' relay shall energize if the door is opened without a valid user entry or egress input. OUTPUTS: Main Relay: 5 Amp, Form C 24VDC with 10 Amp surge. The keypad memory shall have nonvolatile EEPROM memory for up to 120 users. Note: Keypads using the 293 Relay Board, need an additional 30mA for each relay energized. All e style keypads mount to any standard single-gang electrical box or directly to any wall.The access control system shall be Alpha Communications®/IEI model 212I keypad or approved equivalent. Linear Indoor Flush-mount Keypad 212i is an affordable single door access control keypad designed to meet the indoor flush mount needs of lighter volume. Integrated door control, proximity reader and keypad. The proximity reader is capable of being mounted up to a maximum of 10 feet away from the prox.pad. Each e style keypad contains illuminated clear keys that make operation in low-light situations easy and accurate. The prox.pad can be used for stand alone access control, or used as a reader for IEI access systems or most Wiegand systems. In addition, each e style keypad uses hardened keys to assure long-term, high-quality performance. The electronics for each e keypad are conformal coated in the manufacturing process in order to provide this level of application flexibility. It allows 120 users as well as various keypad options.Īll e style keypads are designed for both indoor and outdoor flush mount applications. Additionally, the 212e Keypad can provide basic keyless entry by controlling a door locking device where security is not an issue. The output is timed or latched and operated by a user’s PIN code. Affordable single door access control keypad designed to meet the indoor flush mount needs of lighter volume access.

The 212e Keypad is designed for convenience, and features a single relay output to control any device requiring an on/off switch. Bi-Color Red/Green LED Indicates Relay Status.One of these items ships sooner than the other.

#Iei keypad 212i code#

43mA24VAC typical 91mA with relay energized. IEI 212i Indoor Flush-mount Keypad With its keypad capability this keypad access device provides access control and security assurance The key code technology. 21mA12VAC typical 74mA with relay energized.

A user may then have keypad control over any equipment requiring on/off (handicap ramp, security system alarm), or momentary control inputs (horn/siren). It converts the 3 negative voltage outputs to 3 secondary SPDT relays. 16mA24VDC typical 45ma with relay energized. The 293 optional relay board connects to the back of any Linear IEI 212i and 212w keypad. IEI Linear Corp IEI 212i Style Flush Mount Indoor Keypad (0-211111) 212i - 0-211111. SPECIFICATIONS: MECHANICAL: BOARD DIMENSIONS: 1.80W x 2.845H x 1.125D ELECTRICAL: VOLTAGE: 12-24 Volts AC/DC (No Jumper Required) CURRENT: 8mA12VDC typical 35ma with relay energized. IEI 212e Standalone Installation/Programming Manual This item: IEI 212w Indoor/Outdoor Flush-mount Keypad.